Cooper Crouse-Hinds are premier manufactures of high quality and robust enclosure solutions and assemblies configured to meet the requirements of the most demanding hazardous area and industrial environmental applications. With over 30 years of experience in the design, engineering and manufacture of enclosure solutions, Cooper Crouse-Hinds provides, tried and tested solutions to meet the toughest project and installation needs.
The HVB range is an “ATEX certified” heavy-duty high voltage termination enclosure solution fully compliant with the impact, thermal and ingress protection requirements of EN50014.
HVB is available in three different sizes with two termination versions for either three or four pole connectivity according to the electrical requirements of the application.
Using the highest quality materials and design benefits the HVB high voltage enclosure range is the industry benchmark for quality and performance enclosure solutions for high voltage electrical termination applications.
The retained stainless steel slotted hex bolt fastenings with door retaining hinges provide a rapid means of achieving high integrity ingress protection (IP) of 66 for reliable & rapid environmental protection.
The high integrity “single piece” sealing gasket for superior ingress protection (IP) of 66 and excellent recovery and re-sealing properties for continuous environmental protection.
An integral drainage channel prevents liquids or other solids contaminates from running in or falling into the enclosure when the door is opened, and to minimize gasket path contamination.
An integral external & internal feed through brass earth / ground stud assembly enables rapid and reliable protective earth / ground connection mounted on the side of the enclosure for ease of access.
HVB ENCLOSURE TECHNICAL DATA
Material / Finish Options | 316L Stainless Steel (1.4404 to EN 10088) with superior "corrosion resistant" electro chemical polish. |
| Sheet Steel - Polyester powder coated to RAL 7032. |
Gasket Material | High integrity "one piece" closed cell chloroprene. |
Door Fixing | Detachable, hinged door with 4 or 6 x M6 captive hex screws & padlock hasp. |
| Complete with transparent IP20 terminal safety cover with nylon fixings. |
Enclosure Mounting | 4 x external welded lugs, 11mm Ø holes / slots. |
Terminations | 3 or 4 pole assemblies suitable for up to 30mm wide cable lugs and M12 lug fixings. |
Voltage Ratings | 6.6kV at 50Hz. AC, 3 phase (earthed or unearthed supply systems) |
Gland Plates | 3mm thick top / bottom gland plates drilled as required. |
Enclosure Earth | M10 internal / external brass earth stud assembly & M14 for150mm² phase conductor. |
Certified Ingress Protection (IP) Rating | IP66 to IEC 529. |
Certified Temperature Range | -20°C (-4°F) to +40°C (104°F) ambient. |
Certified Impact Resistance | 7 J (Nm) to EN 50014. |
Certification | ATEX ll 2 G EExe ll T4. – 200A / T5 – 180A / T6 – 160A. (BASEEFA03ATEX0052X) |
Enclosure / terminal assemblies configured to meet clients specification within certification parameters.
Refer to our website: http://www.enclosures-crouse-hinds.uk.com/ for further company & product information.
HVB ENCLOSURE TECHNICAL DATA (Imperial)
