The Ex-Cell enclosure range is an “ATEX” certified enclosure / termination solution for category 2 (formerly zone1) applications and fully compliant with the impact, thermal and ingress requirements of EN50014, with an ingress protection of IP66.

Ex-Cell i Contractor series is zero gland plate enclosure that has been introduced to meet the requirements of the instrumentation market and has been specifically configured for the termination of field devices in multiples of 5 / 6, 10 /12 and 20 / 24. This reflects the most widely used cables configurations of 5 / 6 pairs, 10 /12 pairs and 20 / 24 pairs. The enclosure assembly is fitted with a pre-printed ATEX certification label.

Each of the configurations is fitted with 12, 24 or 48 terminals, plus a cable screen terminal and a horizontally mounted earth bar complete with screw clamps. Clearance holes are provided on the bottom face of the enclosure for a M32, M40 or M50 gland for home run cable and up to 6, 12 or 24; M20 clearance holes for the device cables. Potential unused clearance hole are fitted with 1, 2 or 4 Nickel-plated brass Exe stopping plugs for entries that may not be used. Other entries are taped for transit.

Additionally a Nickel-plated brass IP66 breather drain is fitted to the bottom face of the enclosure to help eliminate condensation and aid drainage of water in the enclosure, safe guarding the internal integrity of the enclosure. An optional Traffolyte identification TAG label can be on request.

Click image to open /
download datasheet